eGFR Calculator

Estimate glomerular filtration rate with the race-free 2021 CKD-EPI equations.

Adults 18+ • mg/dL or µmol/L • optional cystatin C

Equation

Completed years, 18 or older.

Blood (serum) creatinine from your lab report, in the unit printed beside it.

Equation sex parameter

The published equation has separate female and male constants, so it needs this choice. Pick the one that matches how your result should be calculated; it is never inferred. The equation may be less reliable for people not well represented in the studies behind it, including some transgender and intersex people and people taking gender-affirming hormones, so discuss interpretation with your healthcare professional.

Enter or choose the age, serum creatinine, sex parameter above to estimate eGFR.

An educational estimate in mL/min/1.73 m², not a measurement of kidney function, and it may differ slightly from your lab’s reported value. It does not diagnose kidney disease or give medication advice: which kidney function estimate a medicine uses depends on the medicine, so ask your healthcare professional or pharmacist. Your inputs stay in your browser.

This eGFR calculator estimates glomerular filtration rate, a key measure of how well the kidneys filter blood, using the race-free 2021 CKD-EPI equations recommended for adults. Enter age, serum creatinine in mg/dL or µmol/L and the equation's sex parameter; if you also have a serum cystatin C result, you can use the more accurate combined creatinine–cystatin C equation. The result is shown in mL/min/1.73 m² with the equation, the values used and the reference GFR category.

eGFR is an estimate, not a direct measurement. A GFR category from one result is a reference point, not a diagnosis of chronic kidney disease, which needs repeated results over at least 3 months and usually a urine albumin test.

What Is eGFR?

Glomerular filtration rate (GFR) is how much blood the kidneys' filters (glomeruli) clean each minute. Measuring it directly needs special tests, so it is usually estimated from a blood test. The estimated GFR, or eGFR, uses serum creatinine (a muscle waste product the kidneys filter), sometimes with cystatin C, together with age and a sex parameter. It is reported in mL/min/1.73 m², meaning it is scaled to a standard adult body surface area so results can be compared between people. As NIDDK stresses, eGFR is an estimate, not a precise measure of kidney function.

How Is eGFR Calculated?

The calculator uses the race-free 2021 CKD-EPI equations published by NIDDK. With creatinine (Scr) in mg/dL:

eGFRcr = 142 × min(Scr/κ, 1)^α × max(Scr/κ, 1)^−1.200 × 0.9938^age × 1.012 [female]

κ = 0.7 (female) or 0.9 (male); α = −0.241 (female) or −0.302 (male)

The κ value is a threshold: creatinine below it and above it are handled with different exponents. Higher creatinine and older age both lower the estimate. Creatinine in µmol/L is divided by 88.4 first.

Worked example with illustrative values: age 50, serum creatinine 1.0 mg/dL. With the female constants, 1.0 ÷ 0.7 = 1.429, so eGFR = 142 × 1.429^−1.2 × 0.9938^50 × 1.012 ≈ 69 mL/min/1.73 m². With the male constants, 1.0 ÷ 0.9 = 1.111 and eGFR ≈ 92. These match the reference values published for testing implementations of the equation.

Adding cystatin C. Cystatin C is a protein made by all cells, so it depends less on muscle mass than creatinine does. The combined 2021 equation uses both markers:

eGFRcr-cys = 135 × min(Scr/κ, 1)^α × max(Scr/κ, 1)^−0.544 × min(Scys/0.8, 1)^−0.323 × max(Scys/0.8, 1)^−0.778 × 0.9961^age × 0.963 [female]

κ = 0.7 (female) or 0.9 (male); α = −0.219 (female) or −0.144 (male); Scys in mg/L

NIDDK describes the combined equation as more accurate than either marker alone, which is why clinicians may order cystatin C when a creatinine-based estimate may be unreliable or a decision depends on it.

What Is the CKD-EPI Equation?

CKD-EPI (Chronic Kidney Disease Epidemiology Collaboration) is a family of equations for estimating GFR. Earlier versions from 2009 and 2012 included a coefficient for Black race. Because race is a social category, not a biological measure, the 2021 equations were developed without it, and the National Kidney Foundation recommends that labs use the 2021 equation for adults. This calculator uses only the 2021 versions, so results can differ from older reports, calculators using the earlier equations, or a lab that rounds the inputs differently.

What Do eGFR Results Mean?

eGFR results are grouped into GFR categories (G1 to G5). The boundaries below follow KDIGO and the National Kidney Foundation.

Reference GFR categories (mL/min/1.73 m²)
CategoryeGFRDescription
G190 or higherNormal or high
G260–89Mildly decreased
G3a45–59Mildly to moderately decreased
G3b30–44Moderately to severely decreased
G415–29Severely decreased
G5Below 15Kidney failure range

These categories are not a diagnosis.

G1 or G2 is only part of chronic kidney disease when there is also evidence of kidney damage, such as a urine albumin-to-creatinine ratio (uACR) of 30 or higher, for at least 3 months.

An eGFR below 60 may indicate chronic kidney disease only if it stays below 60 for 3 months or longer. A single low result can come from a temporary change, such as acute kidney injury.

That is why the NKF says checking for chronic kidney disease needs both a blood test (eGFR) and a urine test (uACR), usually repeated to confirm that a change has lasted at least 3 months. A healthcare professional interprets the results together with your history and other tests.

eGFR vs. Creatinine Clearance

Creatinine clearance (CrCl), usually estimated with the Cockcroft–Gault equation from age, weight and creatinine, is expressed in mL/min and is not indexed to body surface area. eGFR estimates GFR in mL/min/1.73 m². The two are related but not interchangeable: creatinine clearance tends to be higher than true GFR because the kidney tubules also secrete creatinine. Some medication protocols specify one particular estimate, so do not swap one result for the other without clinical guidance. You can estimate CrCl with the creatinine clearance calculator. This calculator does not give medication doses.

Factors That Can Affect eGFR

  • Age. The equation lowers the estimate with each year of age.
  • Muscle mass. More muscle makes more creatinine and lowers a creatinine-based eGFR; very low muscle mass (for example after amputation, with frailty or some illnesses) can make it look better than it is.
  • Diet and medicines. A large meal of cooked meat, creatine supplements and some medicines can raise creatinine without a change in kidney function.
  • Acute changes. The equations assume creatinine is stable. When kidney function is changing quickly, as in acute kidney injury, eGFR can be very misleading.
  • Lab variation. Different assays and small measurement differences shift results, which is why labs use standardized (IDMS-traceable) creatinine and standardized cystatin C.

When creatinine may not reflect kidney function well, clinicians may add cystatin C, use the combined equation, or measure GFR directly.

Why Trends Matter

eGFR varies a little from test to test even when kidney function is steady. Clinicians therefore look at repeated results over time, along with urine tests, rather than reacting to one number. A trend is more informative than a single value, but this calculator cannot predict how your kidney function will change. Discuss abnormal or changing results with a healthcare professional; the NKF eGFR calculator and NIDDK calculators use the same equations. The body surface area calculator is not needed for the standard indexed eGFR; it is only relevant when a protocol asks for an unindexed value.

How to Use the eGFR Calculator

  1. Enter age in completed years (18 or older).
  2. Enter the serum (blood) creatinine from your lab report and select the unit printed beside it: mg/dL (common in the US) or µmol/L (common in the UK, Europe, Canada and Australia).
  3. Choose the equation’s sex parameter (female or male constants). Nothing is selected for you.
  4. Leave the equation on creatinine only, or, if you have a serum cystatin C result in mg/L, choose the creatinine–cystatin C equation and enter it.
  5. Read the eGFR in mL/min/1.73 m², the equation used, and the reference GFR category with its notes. Copy or print the results, or Reset to clear.

Frequently Asked Questions

What is an eGFR calculator?

A tool that estimates glomerular filtration rate from a blood test, here with the 2021 CKD-EPI equations from age, serum creatinine, an equation sex parameter and, optionally, cystatin C. The result is in mL/min/1.73 m².

What is a normal eGFR?

An eGFR of 90 or higher is in the G1 (normal or high) category and 60–89 is G2 (mildly decreased). Neither means kidney disease unless there is also evidence of kidney damage, such as albumin in the urine, for at least 3 months. eGFR also tends to fall gradually with age.

What does an eGFR below 60 mean?

It falls in category G3a or lower. If eGFR stays below 60 for 3 months or longer, chronic kidney disease may be present, but one result can reflect a temporary change. Discuss it with a healthcare professional, who may repeat the test and check urine albumin.

Can one low eGFR result diagnose kidney disease?

No. Chronic kidney disease requires abnormal results that persist for at least 3 months, usually confirmed with repeat blood tests and a urine albumin-to-creatinine ratio, and interpreted by a healthcare professional.

What is the difference between eGFR and creatinine clearance?

eGFR estimates glomerular filtration rate in mL/min/1.73 m² with equations such as 2021 CKD-EPI. Creatinine clearance, often estimated with Cockcroft–Gault, is in mL/min and tends to be higher than GFR. They are not interchangeable.

How do I convert serum creatinine from µmol/L to mg/dL?

Divide by 88.4. For example, 88.4 µmol/L is 1.0 mg/dL. The calculator converts automatically when you select µmol/L.

What is the 2021 CKD-EPI equation?

The race-free equation from the Chronic Kidney Disease Epidemiology Collaboration, recommended by the National Kidney Foundation for estimating GFR in adults: eGFR = 142 × min(Scr/κ, 1)^α × max(Scr/κ, 1)^−1.200 × 0.9938^age, × 1.012 with the female constants.

What is the difference between creatinine-only and creatinine–cystatin C eGFR?

The creatinine-only equation uses one blood marker that depends on muscle mass. The combined equation adds cystatin C, which depends less on muscle, and NIDDK describes it as more accurate than either marker alone. It needs a separate cystatin C test.

Why can two eGFR calculators produce different results?

They may use different equations (for example the older 2009 CKD-EPI or MDRD), different units, or round age and creatinine differently. Compare results only when they use the same equation.

Can eGFR determine my medication dose?

Not on its own. Which kidney function estimate a medicine uses, and how the dose is set, depends on the medicine and its prescribing information. This calculator gives no dosing advice; ask your healthcare professional or pharmacist.

Can adults aged 18–25 use this equation?

Yes, it is for adults 18 and over. For ages 18 to 25, NIDDK recommends also looking at the pediatric CKiD U25 equation and comparing the two estimates.

Is this calculator suitable for children?

No. Children and teenagers under 18 need pediatric equations, such as CKiD U25, which use different inputs including height.

Last updated: October 25, 2026.